Tungaloy-EPN

Cat No.	Stock	Dimensions (inch)					Insert	# of Inserts
Cat No.	Stock	øD	ød	L₁	L₂	L	Insert	# of Inserts
EPN09050R-U		0.500	0.625	0.354	0.984	2.891	ANMT09T3PPPR-MJ ANMT09T3PPPR-ML	1
EPN09062R-U		0.625	0.625		1.000	2.906		2
EPN09068R-U		0.688	0.750		1.188	3.219		2
EPN09075R-U		0.750			1.188	3.219		3
EPN09100R-U		1.000			1.172	3.203		4
EPN14100R-U		1.000	0.750	0.512	1.375	3.219	ANMT1404PPPR-MJ ANMT1404PPPR-ML	2
EPN14118R-U		1.188	1.000		1.563	3.844		3
EPN14125R-U		1.250						3
EPN14137R-U		1.375						3
EPN14150R-U		1.500						4
EPN14200R-U		2.000	1.250					5

Cat No.	Dimensions (in)				Cermet	Uncoated	Coated
Cat No.	A	B	T	R	NS530	TH10	AH330	T3030	AH120	GH330
ANMT09T3PPPR-MJ	0.375	0.256	0.156	0.016
ANMT09T3PPPR-ML	0.375	0.256	0.156	0.016
ANMT1404PPPR-MJ	0.551	0.375	0.187	0.032
ANMT1404PPPR-ML	0.551	0.375	0.187	0.032
Click for larger image

Work material	Grade	Cutter Diameter (in)
		ø 0.500 ~ ø0.625			ø0.687 ~ ø2.000
		Speed (sfm)	Feed (ipt)		Speed (sfm)	Feed (ipt)
		Speed (sfm)	MJ Breaker	ML Breaker	Speed (sfm)	MJ Breaker	ML Breaker
Medium to high carbon steels Alloy steels	AH330	250 ~ 550	.002 ~ .005		400 ~ 850	.004 ~ .008
	NS530	250 ~ 550	.002 ~ .004		400 ~ 850	.004 ~ .008
	T3030	250 ~ 400	.002 ~ .005		330 ~ 650	.004 ~ .008
	GH330	200 ~ 350	.002 ~ .005		330 ~ 600	.004 ~ .008
Mild steels Low carbon steels	NS530	250 ~ 600	.003 ~ .005		400 ~ 900	.004 ~ .010
	AH330	250 ~ 600	.003 ~ .006		400 ~ 1000	.004 ~ .010
	T3030	250 ~ 400	.003 ~ .006		330 ~ 650	.004 ~0.010
	GH340	200 ~ 400		.003 ~ .006	330 ~ 650		.004 ~ .010
Stainless steels	AH120	250 ~ 500	.003 ~ .006		400 ~ 750		.004 ~ .010
	AH330	250 ~ 500		.003 ~ .006	400 ~ 750	.004 ~ .010
	GH340	200 ~ 400		.003 ~ .006	330 ~ 650		.004 ~ .010
Die steels	AH330	200 ~ 500	.002 ~ .004		330 ~ 650	.004 ~ .008
Die steels	T3030	200 ~ 500	.002 ~ .004		250 ~ 500	.004 ~ .008
Cast irons	AH330	330 ~ 600	.004 ~ .006		500 ~ 850	.006 ~ .012
Cast irons	GH330	330 ~ 500	.004 ~ .006		400 ~ 650	.006 ~ .012
Super alloys	AH120	75 ~ 150	.004 ~ .008	.002 ~ .006	75 ~ 150	.004 ~ .008	.002 ~ .006
Aluminum	TH10	500 ~ 1000		.004 ~ .012	500 ~ 1200		.006 ~ .012

			Click for larger image
Corner Angle		90º
Rake Angle	Axial	09 Type: -4º ~ 5º 14 Type: -2.5º ~ 4º
	Radial	09 Type: -28º ~ -11º 14 Type: -17º ~ -10º

Click for larger image	No.	Part Name	Part Cat No.
	No.	Part Name	EPN09050R-U	From EPN09050R-U to EPN09100R-U	EPN14000 Type
	1	Wrench	T-8D	T-8D	T-9D
	-	Clamp screw	CSTB-2.5S	CSTB-2.5	CSTB-3

EPN 09/14	Specifications
	90º Lead General Purpose End Mill