Tungaloy-H.O.T. Products


	For your hard turning applications, choose from 5 different BX Series grades. We stock full, single corner mini, and multi-corner mini-tip types to give you the most options. Included in this series is the BXC50 with a special TiN/TiCN coating, drastically reducing wear and increasing tool life. View BXC50 H.O.T. Product Memo

	20% higher transverse rupture strength and 10% higher high-temperature hardness than existing ceramic grades, FX105's high thermal conductivity also provides superior resistance to thermal cracks. It's primarily used for medium to rough cutting, so we offer M-class inserts as an economical alternate to our G-class inserts. View FX105 H.O.T. Product Memo

	With fine grain Al2O3 + TiC micro-structure, LX11 provides exceptional hardness and chemical stability for high wear and heat resistance, while incorporating a thin PVD applied TiN layer for additional friction resistance and easy wear identification. As a solid material, all corners and sides can be used, offering further cost savings. View LX11 H.O.T. Product Memo

	Specially developed “Double Bridge Technology” CVD coating. This new coating exhibits very high adhesion strength, which offers extended tool life. Newly developed substrate with higher toughness and better crater wear resistance. View T9000 H.O.T. Product Memo

	Grade T6030 uses a new substrate designed for high strength and notching resistance. Grade T6020 uses a harder substrate for better wear resistance at higher cutting speeds. T6020 has the ability to turn stainless steels at cutting speeds up 700 sfm, thereby reducing cycle time. View T6000 H.O.T. Product Memo

	Our AH Series with TiAlN PVD coating, giving you 3 times better adhesion strength and superior oxidation resistance. Available for turning, milling, and drilling. View AH110/120 H.O.T. Product Memo

	The combination of an aggressive chip breaker form and a “wavy” cutting edge provides better chip control in a variety of cutting conditions of soft steels. View ZF/ZM H.O.T. Product Memo

	The special wiper geometry allows the user to increase feed rate while maintaining or improving surface finish. Aggressive chipbreaker form allows low Ap cutting, which is effective for machining near net shape parts. Wiper inserts are available in two most popular geometries CNMG and WNMG ½” and 3/8” I.C. View AFW H.O.T Product Memo

	DSX uses a micro-grain alloy giving it high toughness, along with our superior Flash Coat TiAlN coating for excellent wear and heat resistance. Flash Coat is less affected by high heat and can be run at higher speeds, improving output. Point angle along with special X thinning for reducing cutting forces and proper chip formation. View DSX H.O.T. Product Memo

	For super-fast indexing and strong clamping power, our A-Type holders provide high accuracy and superb dust resistance for cast iron machining.

	The EPS is a multi-functional, multi-directional end mill for ramping, plunging, shoulder cutting, and z-axis milling. Because of unique insert shape the EPS cutter can mill shoulders with HIGH ACCURACY without leaving any mismatch surface. Efficiently machining most materials, it's offered in sizes from .500” to 1.50”, as well as a wide choice of inserts and multiple radii.