| Face
Mills |
|---|
TZP>>Jetmill
Plunge Roughing
|
| TZF>>Jetmill Plunge Finishing |
| TXP>>Jetmill
High Feed |
| TRD>>Round Insert Jetmill |
| TMD>>LS 45 |
| TAW>>General Purpose |
| Face
Mills |
|---|
| TZP>>Jetmill
Plunge Roughing
|
| TZF>>Jetmill Plunge Finishing |
| TXP>>Jetmill
High Feed |
| TRD>>Round Insert Jetmill |
| TMD>>LS 45 |
| TAW>>General Purpose |
| TZP Z-Axis Plunge Mill |
 |
Utilizes
a series of overlapping plunges, producing higher metal removal rates
and greater reaches than conventional milling |
|
TZF Z-Axis Feed Plunge Mill |
 |
| Ideal
for finishing of deep dies, deep contour, and shoulder work; cuts on
both down and up strokes, reducing cycle time |
| TAD 45° Lead High Positive Face Mill |
 |
| Light
weight, close pitch that offers a low profile and high positive design;
9 grades and 4 chipbreakers w/ built-in wiper technology: can cut almost
any material |
|
TRD Round Insert Jetmill |
 |
| High
positive multi-functional design capable of plunging, ramping, and circle
interpolation; high strength round insert |
| TXP Super High Feed Face Mill |
 |
| Insert
design directs cutting forces back into the spindle making this face
mill capable of running in excess of 250 ipm |
| TMD4400I-U 45° Lead General Purpose Face Mill |
 |
| Quick,
strong wedge and locator design with replacable insert pockets
for complete "in field" rebuild capability.
|
 |
 |
| TAW |
 |
| Newly designed, 45 degree angle, general purpose cutter offering a large variety of grades and chipbreakers. |
| TPW |
 |
| Newly
designed, 90 degree angle, general purpose cutter offering a large variety
of grades and chipbreakers. |
Milling>>Shell Milling
| TPN14000-U 90° Lead General Purpose Mill |
 |
| High
rake insert design allows greater feed tables and lower cutting forces |
| Shoulder
Mills |
|---|
| TPN>>90° General Purpose |
| TSP>>LS 90 |
| TSE>>90° General Purpose |
| TPW>>90° General Purpose |
| TSP4000IAU 90° Lead General Purpose Mill |
 |
| High
accuracy, light weight cutter with replaceable locators ground to within
.00005 tolerance; provides less than .001 axial run out from pocket
to pocket |
|
TPD 90° Lead High Positive Shoulder Mill |
 |
| Ideal
for both light and heavy duty machining; free cutting, high positive
design results in significantly lower cutting forces |
| TSE4000IAU 90° Lead General Purpose Mill |
 |
| High
positive design w/thick, replaceable, accurate pockets allow roughing
and finishing of a variety of materials |